Paraffinic Base Oil Supplier — Group I, II & III (SN150, 150N, 500N)
API Group I, II and III paraffinic base oils for lubricant blenders, oil majors and industrial formulators across Southeast Asia. Sourced from verified refineries in South Korea, Taiwan, the Middle East and the US Gulf Coast. Flexitank, ISO tank and bulk vessel cargoes.
Grades & variants
01
Group I (SN150, SN500, Bright Stock)
Solvent-refined paraffinic base oil for industrial lubricants, process oils and marine engine oils. Viscosity Index ~95.
02
Group II (150N, 500N, 600N)
Hydroprocessed base oil with <0.03% sulphur and >90% saturates. The workhorse grade for passenger car and heavy-duty motor oils.
03
Group III (ADbase, YUBASE, Nexbase)
Severely hydrocracked / hydroisomerised base oil with Viscosity Index ≥120. For synthetic-blend and full-synthetic engine oils.
04
Packaging Options
Flexitank (20–24 MT), ISO tank (22 MT), drums (180 kg) and bulk vessel parcels (1,000–5,000 MT).
Where this grade is used
- 01Passenger car motor oil (PCMO) blending
- 02Heavy-duty diesel engine oil (HDEO)
- 03Industrial gear, hydraulic and turbine oils
- 04Marine cylinder and trunk piston oils
- 05Greases and metalworking fluids
- 06Process oils for rubber, textile and plastics
Quality & compliance
Each Paraffinic Base Oil Supplier — Group I, II & III (SN150, 150N, 500N) shipment is supplied with Certificate of Analysis (COA), Product Data Sheet (PDS) and Material Safety Data Sheet (MSDS / SDS). Independent third-party inspection (SGS, Intertek or equivalent) is available on request and arranged at the loading port prior to vessel departure. See our Quality & Compliance page for full documentation standards.
- Certificate of Analysis (COA)Per shipment
- Product Data Sheet (PDS)Per shipment
- Material Safety Data Sheet (MSDS / SDS)Per shipment
- Third-party inspection report (on request)Per shipment
Frequently asked
What is the difference between Group I, II and III base oil?
Group I is solvent-refined with VI ~95. Group II is hydroprocessed with VI ~100–120 and very low sulphur. Group III is severely hydrocracked / hydroisomerised with VI ≥120 — close to PAO synthetic performance at lower cost.
Can you supply ADbase or YUBASE Group III?
Yes — we trade Korean Group III (S-Oil ADbase, SK YUBASE) and Middle East Group III in flexitank, ISO tank and bulk vessel quantities for lubricant blenders across Southeast Asia.
What are the typical minimum order quantities?
20 MT for flexitank, 22 MT for ISO tank, and 1,000 MT minimum for bulk vessel parcels. Drum orders start at one pallet (4 × 180 kg drums).
Do you deliver to Vietnam, Thailand and the Philippines?
Yes. We regularly deliver paraffinic base oil to Ho Chi Minh, Haiphong, Laem Chabang, Map Ta Phut, Manila and Batangas under CIF and DAP terms.
Discuss your Paraffinic Base Oil Supplier — Group I, II & III (SN150, 150N, 500N) requirement.
Send us your grade, volume and delivery port. All inquiries are reviewed based on product, logistics and commercial requirements.